Copper-Zinc Matrix Cemented Carbide Composite Hardfacing Electrodes (TWDCu0170–TWDCu0670) — is sintered from 70% crushed cemented tungsten carbide particles and 30% Cu-Zn brazing alloy matrix. Sharp-edged carbide grits deliver aggressive downhole cutting performance, while slightly blunted grits excel in heavy grinding and abrasive wear via oxy-acetylene hardfacing.
Product core positioning: Oilfield-grade 70% cemented carbide / 30% Cu-Zn composite hardfacing rods (W14–16 × L450 mm, ~500 g) engineered for junk mills, milling shoes, and hole openers.
Grades, Dimensions & Carbide Grit Sizes (TWDCu Series)
| Grade (Cu-Zn Matrix) | Rod Dimension | Composition (Hard / Matrix) | Carbide Grit Size | Application Focus |
|---|---|---|---|---|
| TWDCu0170 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Zn | 0.4–1.6 mm | Fine grit for stabilizers, tool joints, and smooth wear pads |
| TWDCu0270 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Zn | 1.6–3.2 mm | Medium-fine grit for reamers, hydraulic cutters, and core bits |
| TWDCu0370 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Zn | 3.2–4.8 mm | Medium grit for milling shoes, fishing tools, and auger bits |
| TWDCu0470 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Zn | 4.8–6.4 mm | Coarse grit for junk mills, window mills, and hole openers |
| TWDCu0570 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Zn | 6.4–8.0 mm | Extra-coarse grit for heavy-duty junk mills and casing milling |
| TWDCu0670 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Zn | 8.0–9.5 / 10.0 mm | Ultra-coarse grit for extreme downhole steel milling & crushers |
Note: TWDCu series uses a Cu-Zn brazing alloy matrix. Carbide grit shape (sharp or blunted), particle size, and matrix ratio can be customized. Standard rod width 14–16 mm, length 450 mm, weight ~500 g.
Core Advantages & Features
- 70% high-density crushed cemented carbide grit loading delivers rapid downhole metal-cutting capability.
- Low-melting-point Cu-Zn brazing matrix flows smoothly under oxy-acetylene flame without degrading carbide sharpness.
- Six standardized grit sizes from 0.4 mm to 10.0 mm cover every oilfield milling and wear application.
Typical Application Fields
- Downhole & wellhead oilfield tools: junk mills, milling shoes, and fishing tools
- Hole openers, stabilizers, reamers, tool joints, and hydraulic cutters
- Core bits, piling & auger bits, and waste-handling crushers

