Copper-Nickel-Zinc Matrix Cemented Carbide Composite Hardfacing Electrodes (TWDNi0170–TWDNi0670) — is sintered from 70% crushed cemented carbide particles and 30% high-strength Cu-Ni-Zn (nickel-silver) brazing alloy matrix. Compared with standard brass matrix rods, the Cu-Ni-Zn matrix delivers higher tensile strength, superior carbide retention under shock, and improved corrosion resistance.
Product core positioning: High-strength 70% cemented carbide / 30% Cu-Ni-Zn composite hardfacing rods (W14–16 × L450 mm, ~500 g) for demanding oilfield reamers, mills, and heavy impact tools.
Grades, Dimensions & Carbide Grit Sizes (TWDNi Series)
| Grade (Cu-Ni-Zn Matrix) | Rod Dimension | Composition (Hard / Matrix) | Carbide Grit Size | Application Focus |
|---|---|---|---|---|
| TWDNi0170 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Ni-Zn | 0.4–1.6 mm | Stabilizers, tool joints, and corrosive wear pads |
| TWDNi0270 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Ni-Zn | 1.6–3.2 mm | Reamers, hydraulic cutters, and core bits |
| TWDNi0370 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Ni-Zn | 3.2–4.8 mm | Milling shoes, fishing tools, and piling/auger bits |
| TWDNi0470 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Ni-Zn | 4.8–6.4 mm | Heavy-duty reamers, junk mills, and hole openers |
| TWDNi0570 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Ni-Zn | 6.4–8.0 mm | High-impact downhole junk mills and casing mills |
| TWDNi0670 | W14–16 × L450 mm (500 g) | 70% Cemented Carbide / 30% Cu-Ni-Zn | 8.0–9.5 / 10.0 mm | Extreme heavy-shock milling tools and waste crushers |
Note: TWDNi series uses a Cu-Ni-Zn brazing matrix for enhanced bond strength and toughness. Custom grit shapes, sizes, and compositions available upon request.
Core Advantages & Features
- Cu-Ni-Zn matrix offers superior mechanical strength and carbide-retention toughness under high torque and shock loads.
- Better resistance to downhole brine and chemical corrosion than standard Cu-Zn matrix.
- Applied easily via standard oxy-acetylene hardfacing with clean wetting onto steel tool bodies.
Typical Application Fields
- Oilfield reamers, junk mills, window mills, and fishing tools
- Hole openers, stabilizers, tool joints, and hydraulic cutters
- Core bits, piling & auger bits, and industrial waste-handling crushers

