Stainless Steel Hardfacing Flux-Cored Welding Wires (TW307–TW631N Series)

Stainless Steel Hardfacing Flux-Cored Welding Wires (TW307–TW631N Series)


Austenitic, martensitic, and precipitation-hardening stainless steel hardfacing flux-cored wires (TW307–TW631N) for continuous caster rolls, valves, and corrosive wear.

E-mail: max@tensileweld.com

Phone / WhatsApp / WeChat: +8615066821752


Product Description

Stainless Steel Hardfacing Flux-Cored Welding Wires (TW307–TW631N Series) — provides austenitic, martensitic (13Cr / 17Cr), and precipitation-hardening stainless steel flux-cored hardfacing wires engineered for thermal fatigue, corrosion, cavitation, and high-temperature metal-to-metal wear.

Product core positioning: Corrosion- and thermal-fatigue-resistant stainless steel hardfacing FCW family (125 HB to 57 HRC) widely used in metallurgical continuous casting rolls and petrochemical valves.

Part 1: Austenitic & 13Cr Martensitic Series (TW307–TW414N) — Chemical Composition (wt%) & Hardness

Product C Si Mn Cr Ni Mo V / Re / Nb W / Nb / N Fe Hardness
TW307-G / TW307-S 0.10 0.90 7.10 17.30 8.50 — — — Bal. 135–175 HB
TW307Mo-S 0.05 0.80 4.00 20.00 9.80 1.10 — — Bal. 135–175 HB
TW308L-O 0.03 0.80 1.00 20.00 10.50 — — — Bal. 150–180 HB
TW309Mo-O 0.05 0.80 1.00 23.50 12.50 2.30 — — Bal. 150–180 HB
TW310MnRe-S 0.12 0.30 6.50 26.80 21.30 — Re: 0.25 — Bal. 125–175 HB
TW310Nb-S 0.08 0.70 4.00 25.50 20.80 1.50 Nb: 0.70 W: 1.30 Bal. 225–275 HB
TW316L-O 0.03 0.90 0.80 19.50 12.50 2.70 — — Bal. 125–175 HB
TW356-S 0.70 0.65 1.25 12.00 0.70 3.80 V: 2.00 W: 0.90 Bal. 48–52 HRC
TW385-S 1.80 0.45 1.35 16.00 — 0.50 — — Bal. 53–56 HRC
TW410L-G 0.30 0.45 1.25 12.50 — — — — Bal. 225–275 HB
TW411L-S 0.04 0.45 0.65 14.80 1.00 0.50 V: 0.05 Nb: 0.08 Bal. 250–300 HB
TW411-S 0.12 0.36 1.20 12.50 1.50 0.95 — — Bal. 39–45 HRC
TW411N-G / TW411N-S 0.05 0.65 1.50 12.50 1.55 0.60 V: 0.35 N: 1.70 Bal. 35–37 HRC (after 600°C: 39–43 HRC)
TW412L-S 0.07 0.36 0.09 12.50 2.40 0.81 V: 1.30 — Bal. 40–45 HRC
TW412-S 0.12 0.43 0.95 12.70 2.48 0.95 V: 1.20 — Bal. 45–50 HRC
TW413-S 0.10 0.46 1.05 12.75 3.25 1.20 V: 0.21 Nb: 0.17 Bal. 38–42 HRC (after 560°C: 42–45 HRC)
TW413N-S 0.04 0.40 1.20 12.98 3.35 1.30 V: 0.08 Nb: 0.15 Bal. 44–50 HRC
TW414N-S / TW414N-O 0.04 0.70 1.20 12.50 4.00 0.40 — N: 0.10 Bal. 44–50 HRC

Part 2: High-Temperature Martensitic & 17-4PH Series (TW415–TW631N) — Chemical Composition (wt%) & Hardness

Product C Si Mn Cr Ni Mo V / N / Cu W / Nb / Co Fe Hardness
TW415-G / TW415-S 0.07 0.45 1.15 13.00 5.50 1.05 — — Bal. 38–42 HRC (after 520°C: 39–43 HRC)
TW415N-S 0.04 0.70 1.20 12.50 3.50 1.20 N: 0.09 — Bal. 43–48 HRC
TW416N-S 0.03 0.75 1.25 12.80 1.55 0.65 V: 0.12 W: 0.75 Bal. 37–40 HRC (after 630°C: 40–45 HRC)
TW417N-S 0.03 0.80 1.20 12.80 5.00 0.60 V: 0.50 W: 0.80 Bal. 38–40 HRC (after 630°C: 44–50 HRC)
TW418N-O / TW418N-S 0.30 0.60 1.35 12.75 5.00 1.80 V: 0.30 W: 1.05 Bal. 40–45 HRC (after 600°C: 44–50 HRC)
TW420-S 0.27 0.40 1.50 13.50 — — — — Bal. 50–55 HRC
TW421-S 0.25 0.25 0.90 12.70 0.50 1.05 V: 0.25 — Bal. 49–53 HRC (after 530°C: 45–47 HRC)
TW422-S 0.35 0.25 1.20 12.00 1.50 0.21 V: 0.30 W: 3.50 Bal. 55–57 HRC (after 550°C: 50–54 HRC)
TW423-S (High-C) 0.25 0.50 1.20 12.30 0.10 1.00 V: 0.17 Nb: 0.18 Bal. 49–51 HRC (after 510°C: 46–48 HRC)
TW425-S 0.27 0.60 1.20 12.80 0.60 1.80 V: 0.19 W: 1.40 Bal. 50–55 HRC
TW426-S 0.28 0.45 1.35 12.60 0.50 1.05 V: 0.25 W: 0.80 Bal. 50–55 HRC
TW429-S 0.25 0.36 1.25 12.20 0.60 2.70 V: 0.25 Co: 1.50 Bal. 49–52 HRC (after 550°C: 46–48 HRC)
TW430-S / TW430-G 0.07 0.50 1.25 18.00 — — — — Bal. 170–200 HB
TW430NiMo-S 0.05 0.65 1.20 17.00 5.60 1.30 — — Bal. 150–180 HB
TW431-S 0.40 0.90 1.00 17.00 0.50 1.10 — — Bal. 30–35 HRC
TW423-S (Low-C) 0.04 0.45 0.60 19.70 4.20 1.40 V: 0.18 Nb: 0.15 Bal. 200–240 HB
TW630-S 0.05 0.40 1.20 16.00 5.50 0.60 Cu: 3.00 Nb: 0.20 Bal. 175–225 HB
TW630N-S 0.05 0.40 1.20 16.00 5.50 0.60 Cu: 4.00 Nb: 0.10 Bal. 35–39 HRC
TW631N-S 0.05 0.40 1.20 13.00 5.50 0.60 Cu: 3.00 Nb: 0.10 Bal. 37–41 HRC

Core Advantages & Features

  • Nitrogen-alloyed martensitic grades (TW414N / TW415N / TW418N) offer exceptional resistance to thermal checking and corrosion.
  • Smooth submerged-arc and open-arc slag detachability with low crack sensitivity.
  • Retains hardness after tempering up to 600–630 °C.

Typical Application Fields

  • Steel mill continuous casting rolls (CCM rolls) and table rolls
  • Valve seats, pump shafts, and hydro turbine cavitation repair
  • Corrosive high-temperature industrial rollers and steam fittings

Request for Quotation