Square Sintered Nickel-Based Tungsten Carbide Hardfacing Rods (TWD4030304-6 / TWD5515154-2 / TWD4045154-4) — is vacuum-sintered in square cross-sections (4.0×4.0×600 mm and 6.0×6.0×600 mm) containing 45–60% spherical cast tungsten carbide (SCTC), irregular CTC, or alloy granules (GQ06/GS06) in a Ni-Cr-B-Si self-fluxing matrix.
Product core positioning: Precision square-profile sintered tungsten carbide hardfacing bars built for controlled oxy-acetylene flame hardfacing of PDC drill bits and flat wear edges.
Grades, Sizes, Fillers & Mesh Specifications
| Grade | Size (mm) | Filler | Mesh Size | WC% | Process | Application |
|---|---|---|---|---|---|---|
| TWD4030304-6 | 4.0×4.0×600 | SCTC | 45–80 / 100–325 mesh | 60% | Sintered | Oxy-acetylene flame hardfacing for oil drilling tools, PDC drill bits & wear parts |
| TWD4030306-6 | 6.0×6.0×600 | SCTC | 45–80 / 100–325 mesh | 60% | Sintered | Oxy-acetylene flame hardfacing for oil drilling tools, PDC drill bits & wear parts |
| TWD5515154-2 | 4.0×4.0×600 | GQ06 + CTC | 16–40 / 20–30 mesh | 45% | Sintered | Oxy-acetylene flame hardfacing for oil drilling tools, PDC drill bits & wear parts |
| TWD5515156-2 | 6.0×6.0×600 | GQ06 + CTC | 16–40 / 20–30 mesh | 45% | Sintered | Oxy-acetylene flame hardfacing for oil drilling tools, PDC drill bits & wear parts |
| TWD4045154-4 | 4.0×4.0×600 | GQ06 + GS06 | 20–40 / 80–200 mesh | 60% | Sintered | Oxy-acetylene flame hardfacing for oil drilling tools, PDC drill bits & wear parts |
Core Advantages & Features
- Square bar geometry sits steadily on flat or blade surfaces and provides consistent deposition volume.
- Dual-mesh carbide blending fills micro-voids between coarse particles for maximum erosion resistance.
- Smooth oxy-acetylene wetting at ~1050 °C with strong metallurgical bond to steel substrates.
Typical Application Fields
- PDC steel-body drill bit gauge pads and blades
- Oilfield stabilizers, reamers, and downhole wear pads
- Mining, tunneling, and heavy industrial flat wear edges

