Submerged Arc Welding Flux SJ301
Specification: EN760 SA CS 189 AC H5
AWS A5.17 F6A0-EL8 F7A2-EM12K
Applications:
Butt and flat fillet welding of miniature LPG tanks, ships, vehicles, agricultural implements, machinery, boilers, bridges, structural steels.
Characteristics: SJ301 is an agglomerated calcium-silicate type welding flux.
Metallurgical behavior:
High silicon pick-up is obtained. When the manganese content in wire is less than 1.5%, also is a manganese pick-up.
Grain Size:10 to 60 mesh
Basicity:1.0(BIlW)
Damp fux should be re-dried at 300-350 °C for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
Chemical Composition of SJ301 (%)
| Si0₂+Ti0₂ | CaF₂ | Al₂0₃+Mn0 | CaO+MgO | S | P |
| 30-40 | 5-13 | 25-30 | 5-10 | ≤0.05 | ≤0.05 |
Chemical Composition of Deposited Metal
| Wire | C | Si | Mn |
| EL8 | 0.05-0.10 | 0.35-0.50 | 1.2-1.5 |
| EM12K | 0.05-0.10 | 0.35-0.50 | 1.4-1.6 |
Mechanical Properties of the Deposited Metal
| Wire | Standard | Yield Point σₛ (Mpa) | Tensile Strength σᵦ(Mpa) | Elongation σ₅(%) | Impact Value(J) |
| EL8 | F6A0-EL8 | ≥350 | ≥420 | ≥22 | ≥40(0°C) |
| EM12K | F7A2-EM12K | ≥410 | ≥500 | ≥30 | ≥60(-20°C) |
