Round Vacuum-Sintered Nickel-Based Tungsten Carbide Hardfacing Rods (TWD4060 / TWD403030 / TWD404020 / TWD404515 / TWD405406)

Round Vacuum-Sintered Nickel-Based Tungsten Carbide Hardfacing Rods (TWD4060 / TWD403030 / TWD404020 / TWD404515 / TWD405406)


Round vacuum-sintered Ni-Cr-B-Si + 60% cast tungsten carbide hardfacing rods (Φ4/5/6 × 600 mm, ≥52 HRC) for oxy-acetylene hardfacing of PDC drill bits and wear parts.

E-mail: max@tensileweld.com

Phone / WhatsApp / WeChat: +8615066821752


Product Description

Round Vacuum-Sintered Nickel-Based Tungsten Carbide Hardfacing Rods (TWD4060 / TWD403030 / TWD404020 / TWD404515 / TWD405406) — is manufactured by mixing, pressing, and vacuum sintering nickel-based self-fluxing alloy powder (bonding phase) with 60% spherical or irregular cast tungsten carbide (or alloy granules / WC-Co diamond hard phase). Designed for oxy-acetylene hardfacing at ~1050 °C with smooth flowability and stable weldability.

Product core positioning: Vacuum-sintered round Ni-WC hardfacing rods (Φ4, Φ5, Φ6 × 600±10 mm, ≥52 HRC) engineered for PDC steel-body drill bits, stabilizers, and extreme abrasive wear.

Grades, Hard Phase Composition & Dimensions

Grade Hard Phase Composition Dimensions Hardness
TWD4060*-7 60% Irregular cast tungsten carbide; Ni-Cr-B-Si alloy powder L: 600±10 mm; Φ4, Φ5, Φ6 mm ≥52 HRC
TWD403030*-3 60% Irregular & spherical cast tungsten carbide; Ni-Cr-B-Si alloy powder L: 600±10 mm; Φ4, Φ5, Φ6 mm ≥52 HRC
TWD404020*-3 60% Spherical & irregular cast tungsten carbide; Ni-Cr-B-Si alloy powder L: 600±10 mm; Φ4, Φ5, Φ6 mm ≥52 HRC
TWD403030*-6 60% Spherical cast tungsten carbide; Ni-Cr-B-Si alloy powder L: 600±10 mm; Φ4, Φ5, Φ6 mm ≥52 HRC
TWD404515*-4 60% Alloy granules; alloy grit; Ni-Cr-B-Si alloy powder L: 600±10 mm; Φ4, Φ5, Φ6 mm ≥52 HRC
TWD405406*-8 60% Spherical cast tungsten carbide; WC-Co diamond; Ni-Cr-B-Si alloy powder L: 600±10 mm; Φ4, Φ5, Φ6 mm ≥52 HRC

Note: ‘*’ denotes diameter Φ4, Φ5, or Φ6 mm (e.g., TWD40606-7 is Φ6 mm). Customization available. Applicable to all steel substrates except manganese steel (not recommended for cast iron).

Core Advantages & Features

  • Vacuum-sintered dense rod structure ensures zero powder fallout, low oxidation, and clean oxy-acetylene fusion at ~1050 °C.
  • Multiple hard-phase options (irregular CTC, spherical SCTC, alloy granules, and WC-Co diamond) tailored to cutting vs. erosion wear.
  • Outstanding resistance to impact, abrasive wear, and downhole corrosion with ≥52 HRC coating hardness.

Typical Application Fields

  • Oil drilling tools: PDC steel-body drill bits and downhole stabilizers
  • Concrete mixer blades and slurry pumps
  • Coal mine chutes, coal drill rods, and tunneling rock-drilling machinery parts

Request for Quotation