Nickel-Based Alloy Hardfacing Flux-Cored Welding Wires (TW920–TW982 Series)

Nickel-Based Alloy Hardfacing Flux-Cored Welding Wires (TW920–TW982 Series)


Nickel-based alloy hardfacing flux-cored wires (TW920–TW982, including Inconel 625, Inconel C-276, Udimet 520, and Ni608A 58–62 HRC) for high-temperature corrosion & wear.

E-mail: max@tensileweld.com

Phone / WhatsApp / WeChat: +8615066821752


Product Description

Nickel-Based Alloy Hardfacing Flux-Cored Welding Wires (TW920–TW982 Series) — delivers high-nickel superalloy and boron-hardened nickel flux-cored welding wires (gas-shielded -G and submerged-arc -S) for severe corrosion, thermal shock, and high-temperature wear environments.

Product core positioning: Superalloy nickel-based cladding & hardfacing FCW family (150–230 HB corrosion-resistant alloys up to 58–62 HRC wear-resistant NiCrBSi).

Chemical Composition (wt%) & Hardness (TW920–TW982 Series)

Product C Si Mn Cr Nb Mo Fe Ni Other Hardness
TW982-G (Ni6082) 0.03 0.30 3.00 20.00 2.50 — 1.50 Bal. — 175–225 HB
TW976-G / TW976-S (Inconel C-276) 0.05 0.35 1.30 16.00 13.80 — 3.00 Bal. Co: 2.50 190–210 HB
TW960-G (Ni608A) 0.75 4.50 0.20 16.20 — 2.00 4.50 Bal. B: 3.10 58–62 HRC
TW925-G / TW925-S (Inconel 625) 0.03 0.30 0.25 22.30 3.80 9.00 1.50 Bal. — 150–200 HB
TW920-G (Udimet 520) 0.04 0.25 0.30 19.00 — 6.00 2.50 Bal. Co: 13.00, W: 1.00, Ti: 3.00, Al: 2.00 180–230 HB

Core Advantages & Features

  • Superior resistance to high-temperature oxidation, pitting, crevice corrosion, and aggressive chemical media.
  • TW960-G (Ni608A) delivers 58–62 HRC wear hardness combined with nickel-matrix corrosion resistance.
  • Available in gas-shielded (-G) and submerged-arc (-S) versions for high-deposition industrial cladding.

Typical Application Fields

  • Petrochemical reactors, waste-to-energy boiler tubes, and flue-gas desulfurization (FGD) equipment
  • High-temperature hot forging dies, valve trim, and corrosive pump components
  • Offshore oil & gas subsea equipment cladding

Request for Quotation