Iron-Based Alloy Hardfacing & Laser Cladding Powders (TWDS309L–TWDS430L / TWDFe55–TWDFe1100)

Iron-Based Alloy Hardfacing & Laser Cladding Powders (TWDS309L–TWDS430L / TWDFe55–TWDFe1100)


Water & gas atomized austenitic/martensitic/ferritic stainless steel and high-hardness Fe-Cr-Ni-B-Si powders (HB 90 to 62 HRC) for laser cladding, PTA, and HVOF.

E-mail: max@tensileweld.com

Phone / WhatsApp / WeChat: +8615066821752


Product Description

Iron-Based Alloy Hardfacing & Laser Cladding Powders (TWDS309L–TWDS430L / TWDFe55–TWDFe1100) — provides cost-effective stainless steel (309L, 316L, 410L, 420, 430L) and high-hardness Fe-Cr-B-Si-Mo-C alloy powders (35–62 HRC) for laser cladding, PTA, and HVOF repair.

Product core positioning: High-efficiency iron-based stainless & wear-resistant alloy powders covering corrosion/cavitation repair through 55–62 HRC hydraulic prop and oil & gas cladding.

Grades, Composition, Particle Size & Applications

Grade Series Composition Type Particle Sizes Properties & Applications
TWDS309L-23 / -27 Fe-23Cr-12Ni-1Mn-0.5Si Water & Gas Atomized -150/+53, -125/+45 µm PTA/Laser cladding. 1. HB ≤90. 2. Austenitic stainless steel. 3. Repair against corrosion, cavitation & low-temp particle erosion. 4. Max service temp: 500°C.
TWDS316L-23 / -14 / -6 / -4 Fe-17Cr-12Ni-2.5Mo Water & Gas Atomized -150/+53, -90/+45, -53/+20, -45/+15 µm PTA/HVOF/Laser cladding. 1. HB ≤90. 2. Austenitic stainless steel. 3. Repair against corrosion, cavitation & low-temp particle erosion. 4. Max service temp: 540°C.
TWDS410L-23 / -27 / -4 Fe-12.5Cr Water & Gas Atomized -150/+53, -125/+45, -45/+15 µm PTA/HVOF/Laser cladding. 1. HB ≤183. 2. Martensitic stainless steel. 3. Corrosion, cavitation & low-temp erosion repair. 4. Max service temp: 420°C.
TWDS420-23 / -21 / -6 / -4 Fe-13Cr Water & Gas Atomized -150/+53, -106/+45, -53/+20, -45/+15 µm PTA/HVOF/Laser cladding. 1. HB ≤223. 2. Martensitic stainless steel. 3. Corrosion, cavitation & low-temp erosion repair. 4. Max service temp: 420°C.
TWDS430L-23 / -21 / -6 / -4 Fe-17Cr Water & Gas Atomized -150/+53, -106/+45, -53/+20, -45/+15 µm PTA/HVOF/Laser cladding. 1. HB ≤183. 2. High-Cr ferritic stainless steel. 3. Corrosion protection & easy machining. 4. Max service temp: 500°C.
TWDFe1000 Fe-15Cr-6.5Ni-3B-3Si Water & Gas Atomized -45/+20 µm HVOF. 1. 58 HRC. 2. Oil & gas surface reinforcement under corrosive-wear conditions. 3. Max service temp: 550°C.
TWDFe1100 / TWDFe1100-23 Fe-28Cr-17Ni-4.5Mo-1.3Si Water & Gas Atomized -53/+20, -150/+53 µm PTA/HVOF/Laser cladding. 1. 35 HRC. 2. Engine valves. 3. Max service temp: 650°C.
TWDFe55-23 Fe-18Cr-3Ni-1B-1Si Water & Gas Atomized -150/+53 µm Laser cladding. 1. 55 HRC. 2. Enhanced wear & corrosion resistance. 3. Hydraulic props/cylinders. 4. Max service temp: 550°C.
TWDFe0600 Fe-30Cr-5Ni-3Mo-3Si-2B-3.5C Water & Gas Atomized -180/+75 µm PTA/Laser cladding. 1. 62 HRC. 2. Oil & gas corrosive-wear hardfacing. 3. Plastic extruder screws, hydraulic rods, pump shafts, glass molds, baffles, valve faces. 4. Max temp: 600°C.

Core Advantages & Features

  • Cost-effective laser cladding alternative to nickel/cobalt alloys for hydraulic cylinders and large industrial rolls.
  • Clean metallurgical bonding with low dilution and strong corrosion-wear resistance up to 62 HRC.
  • Complete stainless grades (309L, 316L, 410L, 420, 430L) available in PTA, HVOF, and Laser Cladding cuts.

Typical Application Fields

  • Coal mining hydraulic props, hydraulic rods, and cylinder remanufacturing
  • Oil & gas corrosive-wear parts, pump shafts, and valve faces
  • Plastic extruder screws, engine valves, and hydro cavitation repair

Request for Quotation