E70T-1C (OEM MIG Wire)
AWS SPECIFICATION: AWS A5.20 E70T-1C ASME SFA-A5.20 E70T-9C-H8
Typical Applications:
• Shipbuilding
• Structural fabrication
• General fabrication
• Heavy equipment
Features:
• Designed for welding with 100% CO2 shielding gas
• High deposition in the flat and horizontal positions
• Low hydrogen level (H5)
• Good anti-porosity to zinc primer
Welding Current: DCEP (DC+)
Shielding Gas: 100% CO2, Mix:Ar+20% CO2 (15~25ℓ/min)
Available Sizes
| Diameter
mm |
Spool
15kg |
Spool
20kg |
Spool
25kg |
| 1.2 | √ | ||
| 1.6 | √ | ||
| 2.0 | √ | √ | |
| 2.4 | √ | √ | |
| 3.2 | √ | √ |
Mechanical Properties of Deposited Metal (AW)
Storage: Product should be stored in a dry, enclosed environment, and in its original intact packaging
Size & Recommended Current(DC+ )
Notice: 1. The flow rate of shield gas should within 20L-25L/min in welding. 2. The wire extension should be 15mm-25mm. 3. The surfaces to be welded must be cleaned away impurities of oil contamination, rust, moisture and so on. 4. The welding conditions mentioned above for reference only and it is better to do a welding procedure qualification according to to project before putting it into formal welding
