Carbide-Based Thermal Spray Powders – WC-Co & WC-Ni Series (TWD06 / TWD12 / TWD13 / TWD17 / TWD10N–TWD15N) — offers a complete range of Agglomerated & Sintered and Sintered & Crushed WC-Co (6–17% Co) and low-magnetic-permeability WC-Ni (10–17% Ni) thermal spray powders for HVOF, HVAF, APS, PTA, and centrifugal casting.
Product core positioning: Industrial workhorse WC-Co and corrosion-resistant WC-Ni carbide powder family engineered for maximum wear, sliding, and impact resistance up to 500 °C.
Grades, Compositions, Particle Sizes & Applications
| Grade Series | Composition | Type | Available Particle Sizes | Properties & Applications |
|---|---|---|---|---|
| TWD06-2 / -3 / TWD06 / -10 / -40 / -12 / -1 / -18 | WC-6Co | Agglomerated & Sintered | -180/+75, -180/+63, -180/+45, -125/+90, -125/+75, -106/+45, -53/+20, -45/+20 µm | HVOF/APS/PTA. 1. Max service temp: 500°C. 2. Dense, hard coating with good wear & corrosion resistance. 3. Excellent microstructure & high bond strength. |
| TWD12-14 / -23 / -10 / -8 / -48 / -41 / -6 / -12 / -11 / -40 | WC-12Co (Coarse Cuts) | Agglomerated & Sintered | -150/+106 to -106/+20 µm | HVOF/APS/PTA. 1. Max service temp: 500°C. 2. Dense, hard coating with good wear & corrosion resistance. 3. Excellent microstructure & high bond strength. |
| TWD12-9 / -13 / -3 / -1 / -18 / TWD12 / -26 / -2 / -33 / -20 / -19 / -16 / -22 / -42 / -31 | WC-12Co (Fine/Std) | Agglomerated & Sintered | -90/+45 down to -10/+2 µm | HVOF/APS/HVAF. 1. Medium-grain WC. 2. Max service temp: 500°C. 3. Wear & sliding-wear resistant. 4. Dense coating, high bond strength. 5. Corrugating rolls & general wear parts. |
| TWD12L / TWD12LD / TWD12LD2 Series | WC-12Co (Low-C CGL) | Agglomerated & Sintered | -53/+20, -53/+15, -45/+20, -45/+15, -38/+15, -30/+5, -25/+5 µm | HVOF. Medium/Coarse-grain WC, controlled carbon (3.6%–4.5%). Specifically engineered for Continuous Galvanizing Lines (CGL). |
| TWD12U Series (-4 to -31) | WC-12Co (Fine Grain) | Agglomerated & Sintered | -63/+20 down to -10/+2 µm | HVOF/HVAF. 1. Fine-grain WC. 2. Max service temp: 500°C. 3. Dense coating with excellent oxidation & wear resistance. 4. Superior microstructure & high bond strength. |
| TWD12A Series (-4 to -2) | WC-12Co | Sintered & Crushed | -150/+45 down to -38/+15 µm | HVOF/APS. 1. Medium-grain WC. 2. Max service temp: 500°C. 3. Dense, hard coating with excellent wear resistance. 4. General mechanical components. |
| TWD13A-2 / TWD13A | WC-13Co | Sintered & Crushed | -150/+53 µm, -150/+45 µm | Centrifugal Casting. 1. Coarse-grain WC. 2. Carbon content: 4.0%–4.5%. 3. Injection molding & extruder barrels. |
| TWD17 / TWD17U Series | WC-17Co | Agglomerated & Sintered | -90/+45 down to -20/+5 µm | HVOF/HVAF/APS. Medium-grain (TWD17) & fine-grain (TWD17U) WC. Max service temp: 500°C. Superior coating toughness, dense, high bond strength. |
| TWD10N / TWD12N / TWD15N / TWD17N Series | WC-10Ni / 12Ni / 15Ni / 17Ni | Agglomerated & Sintered | -90/+45, -53/+20, -45/+15, -38/+15, -38/+10, -30/+5, -25/+5 µm | HVOF/HVAF. 1. Max service temp: 500°C. 2. Better corrosion resistance & toughness than WC-Co. 3. Low magnetic permeability. |
Core Advantages & Features
- Complete cobalt-binder spectrum (6%, 12%, 13%, 17% Co) to tune hardness vs. impact toughness.
- WC-Ni grades (10–17% Ni) deliver cobalt-free corrosion resistance and low magnetic permeability.
- Comprehensive particle size cuts from -180/+75 µm (PTA/casting) down to -10/+2 µm (HVAF).
Typical Application Fields
- Corrugating rolls, paper rolls, and precision mechanical shafts
- Continuous Galvanizing Lines (CGL) and injection molding / extruder barrels
- Oil & gas non-magnetic collars, pump components, and aerospace landing gear