Carbide-Based Thermal Spray Powders – WC-Co-Cr & WC-WB-Co Series (TWD10C / TWD10CA / TWD10B) — is engineered for HVOF, HVAF, and APS thermal spray systems, delivering ultra-dense, corrosion- and cavitation-resistant tungsten carbide coatings with medium, fine, and nanocrystalline WC grain structures.
Product core positioning: Premium WC-10Co-4Cr and molten-metal-resistant WC-WB-Co thermal spray powders for subsea valves, paper rolls, hydro turbines, and Continuous Galvanizing Lines (CGL).
Grades, Compositions, Particle Sizes & Applications
| Grade Series | Composition | Type | Available Particle Sizes | Properties & Applications |
|---|---|---|---|---|
| TWD10C-9 / -3 / -4 / -1 / -18 / TWD10C / -10 / -2 / -7 / -20 / -19 / -16 / -22 / -42 / -31 | WC-10Co-4Cr | Agglomerated & Sintered | -90/+45, -75/+45, -53/+20, -53/+15, -45/+20, -45/+15, -45/+11, -38/+15, -38/+10, -30/+10, -30/+5, -25/+5, -20/+5, -15/+5, -10/+2 µm | HVOF/HVAF/APS. 1. Medium-grain WC. 2. Max service temp: 500°C. 3. High-pressure & saline valve parts (e.g. subsea oil & gas). 4. Cavitation & impact-resistant coatings (e.g. hydro turbine runners). |
| TWD10CU-3 / -18 / TWD10CU / -2 / -7 / -20 / -19 / -16 / -22 / -42 / -31 | WC-10Co-4Cr | Agglomerated & Sintered | -53/+15, -45/+20, -45/+15, -38/+15, -38/+10, -30/+10, -30/+5, -25/+5, -20/+5, -15/+5, -10/+2 µm | HVOF/HVAF. 1. Fine-grain WC. 2. Max service temp: 500°C. 3. Dense coating with high bond strength. 4. Paper rolls, gate valves, ball valves, etc. |
| TWD10CH / -2 / -20 / -19 / -16 / -22 / -42 / -31 | WC-10Co-4Cr | Agglomerated & Sintered | -45/+15, -38/+15, -30/+10, -30/+5, -25/+5, -20/+5, -15/+5, -10/+2 µm | HVOF/HVAF. 1. Nanocrystalline WC. 2. Max service temp: 500°C. 3. Smooth coating, fine microstructure & high bond strength. 4. Paper rolls, fan/compressor blades, gate & ball valves. 5. Nanostructured coatings with strict surface finish. |
| TWD10CA / TWD10CA-2 | WC-10Co-4Cr | Sintered & Crushed | -45/+15 µm, -38/+15 µm | HVOF/HVAF. 1. Medium-grain WC. 2. Better corrosion & wear resistance from Co-Cr matrix. 4. Aqueous & wet corrosive environments (hydropower). |
| TWD10B / TWD10B-19 | WC-WB-Co | Agglomerated & Sintered | -45/+15 µm, -30/+5 µm | HVOF/HVAF. 1. Medium-grain WC. 2. Superior wear & corrosion resistance in molten metal. 3. Continuous Galvanizing Lines (CGL). |
| TWD10BN / TWD10BN-19 | WC-WB-CoNiCr | Agglomerated & Sintered | -45/+15 µm, -30/+5 µm | HVOF/HVAF. 1. Medium-grain WC. 2. Superior wear & corrosion resistance in molten metal. 3. Continuous Galvanizing Lines (CGL). |
Core Advantages & Features
- Full WC grain-size engineering: Medium-grain (TWD10C), Fine-grain (TWD10CU), and Nanocrystalline (TWD10CH).
- Superior hard-chrome-replacement corrosion and wear protection up to 500 °C.
- Dedicated boride-modified grades (TWD10B / TWD10BN) resist molten zinc attack in Continuous Galvanizing Lines.
Typical Application Fields
- Subsea oil & gas high-pressure gate valves, ball valves, and saline valve trim
- Hydroelectric turbine runners, paper industry rolls, and compressor blades
- Continuous Galvanizing Line (CGL) sink rolls and stabilizer rolls