Arc Spraying Wear-Resistant Wires (TWDSFe502-4 / TWDSFe552B-4 / TWDSFe652B-4) — is a high-chromium, boron-alloyed iron-based cored wire series (Φ1.6 mm) specifically developed for twin-wire electric arc thermal spraying, producing dense, ultra-hard wear-resistant coatings from 450 up to 900 HV0.3.
Product core positioning: High-efficiency Φ1.6 mm Fe-Cr-C-B electric arc spraying cored wires for low-heat-input wear reinforcement of large industrial rolls and cylinders.
Grades, Composition & Coating Hardness
| Grade | Composition | Diameter | Hardness | Process & Application |
|---|---|---|---|---|
| TWDSFe502-4 | Fe-28Cr-5C-1Mn | Φ1.6 mm | 450–600 HV0.3 | Arc spraying. Surface wear-resistant reinforcement of paper-industry dryer cylinders and other wear-intensive operating conditions. |
| TWDSFe552B-4 | Fe-30Cr-1C-4B-1.75Si-0.3Mn | Φ1.6 mm | 600–800 HV0.3 | Arc spraying. High-hardness amorphous/nanocrystalline wear reinforcement for dryer cylinders and industrial rolls. |
| TWDSFe652B-4 | Fe-28Cr-5C-5B-0.6Si-0.3Mn | Φ1.6 mm | 800–900 HV0.3 | Arc spraying. Ultra-hard Fe-Cr-C-B surface reinforcement for extreme abrasive wear operating conditions. |
Core Advantages & Features
- Low substrate thermal input eliminates distortion of precision rolls and thin-walled cylinders.
- Boron-modified chemistries (TWDSFe552B-4, TWDSFe652B-4) achieve 600–900 HV0.3 with low porosity and high bond strength.
- High spray rate and cost-effective alternative to hard chrome plating.
Typical Application Fields
- Paper-industry Yankee dryer cylinders and calendar rolls
- Boiler water-wall tubes for high-temperature erosion protection
- Industrial shafts, hydraulic rods, and wear-intensive machinery surfaces
